services

Plastering

skimmingHardwall is a gypsum undercoat for use on most masonry. With a final coat of Multi-Finish in provides a smooth, inert, high quality surface to internal walls. The combination has superior impact resistance, earlier surface drying, a higher than normal resistance to efflorescence, and gives a durable base for the application of decorative finishes.

Skimming is a Multi-Finish gyosum plaster for use on a wide range of backgrounds. It provides a small, inert, high quality surface to internal walls and ceilings, and a durable base for the application of decorative finishes.

Rendering manual and machine applied

Monocouche pral MMonocouche Weber Pral M one coat through coloured render is ready mixed, cementitious, weather resistant, external decorative, suitable for most types of brick or block work. Its fast application allows for short programme periods. It has a A+ Green Guide rating. It is formulated to be spray applied by render pump for even faster application. 24 colours are available 6 standard colours and 18 special colours

 

ParexParextherm retains the traditional appearance of a one coat (monocouche) fa├žade, with the advantage of a specially formulated top coat and anti-crack base coat technology. The system is available in 48 standard colours, can receive a range of textured finishes with the added benefit that it is suitable for manual and sprayed application.

 

 

M1Weber.therm M1 is a new generation of polymer modified through-coloured one coat lightweight mineral render. To be applied to weber external wall insulation systems with meshcloth incorporating a scraped to dry-dash finish. Suitable for manual and sprayed application. Available in 12 standards colours and 24 special colours. Other external thermal insulations products are available.

 

 

KrendK Rend one coat through colour scraped textured finish render applied directly on to block work. Available in 20 standard colours and special colours are available on request.

 

 

 

004Ashlar cuts are recessed joints cut into the finished render whilst the render is still green (set but not fully hardened) enabling the formation of horizontal, vertical and redial recesses.

 

 

 

Sand and cementSand and Cement Render is the application of a thin premixed surface of sand, cement and lime plaster to brick, cement, stone or mud brick. It is often textured, coloured or painted after application. It is generally used on exterior walls but can be used to feature an interior wall.

 

 

tyrolean 2Tyrolean is a cementitious cement based render incorporating silicone technology. Applied using a hand operated or open-hopper spraying machine, the unique honeycomb texture is built up using several angles until a finished thickness of 4mm -6mm is achieved. Hardwearing & weatherproof, therefore highly suitable for coastal, suburban and rural environments.

 

Leave a Reply